|DXCAT is a program dedicated to the Icom® 756 Pro III. It is a CAT
system computer control program which enables you to have a total
control on your transceiver. This program is a Shareware. After 20 days you will be asked
to register. Just send me an email with your first name, last name and callSign.
I will send you back your user Key. The donation is $25 or €25 via Paypal.
Do not forget to drop a few lines on my guestbook, thank you. You will find it
at the bottom of this page. Do not forget to mention your name and the name of the program you vote
A few weeks ago, I decided to resume amateur traffic and bought an second hand (but as brand new) Icom 756 Pro III. This gave me the opportunity to write this program. The purpose was not to make traffic through the computer, i would have bought a DSP transceiver, but to facilitate the operations which would need to open and read the user's manual. I mean programming the frequencies and keyer memories for example. Of course, it is always a good idea to open the user's manual but the fact is...
So this program will enable you to switch frequencies, modes, filters. To look at the programmed memories, modify them, add new ones. Same thing for the keyer memories which will be programmed as fast as you can type on your keyboard. You will be able to monitor the DX-Cluster and switch instantly to the DX frequency as announced.
|But the main purpose of this program is not to
make traffic through a computer interface.
What I wanted to is an easy way to access and program the different memories (main and keyer) without going through a painful process. As you can see on the picture on the right, all the memories are displayed, including the band stacking register content (the memories attached to the front panel buttons. Three values per button for each band). All these memories cans be viewed, edited, modified on the fly with a simple click. No need to look for the user's manual, I did it for you.
You should carefully read the following terms and conditions before using the software. By using this software you indicate that you accept the present license agreement.
One registered copy of this software may either be used by a single developer who uses the software personally on one or more computers, or installed on a single workstation used not simultaneously by multiple developers, but not both.
Provided that you verify that you are distributing the Shareware version you are hereby licensed to make as many copies of the Shareware version of the software and the documentation as you wish; give exact copies of the original Shareware version to anyone; and distribute the Shareware version of the software and the documentation in its unmodified form via electronic means. There is no charge for any of the above-mentioned actions. You are prohibited from charging, or requesting donations, for any such copies, however made; and from distributing the software and/or the documentation with other products (commercial or otherwise) without a prior written permission from F6GQK (Christian RAMADE, the author).
THIS SOFTWARE IS PROVIDED ON AN "AS IS" BASIS WITHOUT WARRANTY OF ANY KIND, EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE PERSON USING THE SOFTWARE BEARS ALL RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE. THE AUTHOR WILL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES DUE TO LOSS OF DATA OR ANY OTHER REASON, EVEN IF THE AUTHOR OR AN AGENT OF THE AUTHOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO EVENT SHALL THE AUTHOR'S LIABILITY FOR ANY DAMAGES EVER EXCEED THE PRICE PAID FOR THE LICENSE TO USE THE SOFTWARE, REGARDLESS OF THE FORM OF THE CLAIM.
|DOWNLOAD THE PROGRAM HERE (NOT YET)|
|EMAIL HERE TO REGISTER|
|Sign my guestbook here|